Design and creation of stainless steel components

Design and creation of custom, stainless steel back panels, side panels, shelves and front panels.

All the components are made of INOX 304 18-10 steel, plates have a thickness of 8/10 or 10/10, with a V 100 water repellent particle board as support.

BACK PANELS

Back (tickness 20mm)

schienale-fiancone-inox-02

Made of AISI 304, 18-10 stainless steel, thicknesses 8/10, with hydro V100 chipboard reinforcement panel.


SIDES

Sides (20mm - 100 mm thickness)

schienale-fiancone-inox-03

Made of AISI 304, 18-10 stainless steel externally, internally feature stainless steel bands with filler/visible part melaminecoated and levelling feet.

Sides (20mm - 100 mm thickness)

schienale-fiancone-inox-04

Made of AISI 304, 18-10 stainless steel externally, internally feature a stainless steel backing panel with filler and levelling feet.

Fully welded side panels

schienale-fiancone-inox-05

Made of AISI 304, 18-10 stainless steel externally, internally feature a stainless steel backing panel, totally welded along the edges, with filler and levelling feet.


SHELVES

Shelves (20mm - 60 mm thickness)

Made of AISI 304, 18-10 stainless steel on the upper part, feature a flushglued backing panel with filler on the lower part.

3 sides fully welded shelves panels

Made of AISI 304, 18-10 stainless steel on the upper part, feature a flushglued backing panel with filler on the lower part.


FRONT PANELS

Square edge Front Panels / drawers

anta3

Slopping side Front Panels / drawers

anta2

Molding (Groove) Front Panels / drawers

 anta1

schienale-fiancone-inox-09

Version A

moda

Only AISI 304, 18-10 stainless steel covering, welded and smoothed corners.


Version B

modb

AISI 304, 18-10 stainless steel covering only, curved edges, welded and smoothed corners.


schienale-fiancone-inox-09

schienale-fianconeCD

Version C

modc1 modc2

With panel and panel backing in AISI 304, 18/10 stainless steel, welded and smoothed corners with melamine-coated and polyurethane interposed piece, with or without hinge holes.


Version D

modd1 modd2

With panel in AISI 304, 18/10 stainless steel and panel backing in anodized aluminum, welded and smoothed corners with melamine-coated and polyurethane interposed piece, with or without hinge holes.